Pyrometallurgical processing of spent automotive catalysts by collector metal smelting

Пирометаллургическая переработка отработанных автомобильных катализаторов методом плавки с коллекторным металлом
R. A. Pakhomov, V. Yu. Bazhin, V. A. Slobodin
2026-03-29

collector metal smeltingcomposite flux formulationsflux additives (CaO, Na2O, B2O3, CaF2)oxygen activity and oxidation potentialplatinum-group metals (Pt, Pd, Rh) recoverypyrometallurgical smeltingsilicate and aluminosilicate polymerizationslag structure and viscosityspent automotive catalyststhermodynamic modeling / predictive models
This review consolidates current knowledge on the influence of flux addition on the structural and rheological properties of the slag phase during the pyrometallurgical smelting of spent automotive catalysts using a collector metal. The analysis draws on Russian and international studies that examine the processing of automotive catalysts containing platinum-group metals. The study evaluates the mechanisms by which flux additives, including calcium, sodium, and boron oxides, as well as calcium fluoride, modify the melt microstructure. It focuses on the degree of polymerization in silicate and aluminosilicate networks resulting from variations in the distribution of chemically bound oxygen. The findings show that effective control of the pyrometallurgical smelting process depends on maintaining an appropriate balance between polymerized and depolymerized structural units in the slag. Basic oxides reduce melt viscosity by breaking bridging bonds; however, they also increase oxygen activity, which promotes oxidation and loss of platinum, palladium, and rhodium. These results underscore the need for composite flux formulations that adjust melt properties while minimizing the oxidation potential of the slag. A central challenge in improving the recovery of platinum-group metals from this secondary raw material is the development of quantitative models that link flux composition, slag structure, and oxidation potential. These conclusions support predictive evaluation of multicomponent systems and provide a basis for optimizing smelting parameters to increase metal recovery to the collector while reducing energy use and operating costs. The development of predictive models using modern thermodynamic software packages represents a key direction for further research.
1
A key research challenge is creating quantitative models linking flux composition, slag structure, and oxidation potential to optimize recovery, energy use, and costs.
2
Achieving efficient metal recovery requires balancing polymerized and depolymerized structural units in the slag to control melt properties and oxidation potential.
3
Basic oxides decrease melt viscosity by breaking bridging bonds but increase oxygen activity, promoting oxidation and loss of Pt, Pd, and Rh.
4
Composite flux formulations are needed to adjust melt properties while minimizing slag oxidation that causes precious metal loss.
5
Degree of polymerization in silicate and aluminosilicate networks, driven by chemically bound oxygen distribution, controls slag structural and rheological properties.
6
Developing predictive models with modern thermodynamic software is a recommended direction for further research and process optimization.
7
Flux additives (Ca, Na, B oxides and CaF2) modify slag melt microstructure during pyrometallurgical smelting of spent automotive catalysts.

Slag phase in pyrometallurgical smelting of spent automotive catalysts using a collector metal

How flux additions (e.g., Ca, Na, B oxides, CaF2) alter slag melt microstructure, degree of polymerization, rheological properties, and oxidation potential, and their impact on platinum-group metal recovery and smelting optimization

Publication Details
Publication Date
2026-03-29
Journal
Publisher
ISSN
Cited by
0
Access Type
Author Information
Authors
R. A. Pakhomov
V. Yu. Bazhin
V. A. Slobodin
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%