Hybrid surfactant-nanoparticles assisted CO2 foam flooding for improved foam stability: A review of principles and applications
Вытеснение нефти пеной CO2, стабилизированной гибридной системой «поверхностно-активное вещество–наночастицы», для повышения устойчивости пены: обзор принципов и применений
2021-11-02
SCID: 54.1/8ebk52du
Discuss with AI
CO2 foam floodingCO2/water foamsenhanced oil recoverymobility controlsurfactant-nanoparticle stabilization
Figures from the paper
Abstract (AI)
Miscible carbon dioxide (CO2) flooding is a well-established and promising enhanced oil recovery (EOR) technique whereby residual oil is recovered by mixing with injected CO2 gas. However, CO2, being very light and less viscous than reservoir crude oil, results in inefficient sweep efficiency. Extensive research is ongoing to improve CO2 mobility control such as the development and generation of CO2/water foams. The long-term stability of foam during the period of flooding is a known issue and must be considered during the design stage of any CO2 foam flooding project. The foam stability can be improved by adding surfactants as stabilizers, but surfactants generated foams have generally a shorter life because of an unstable interface. Furthermore, surfactants are prone to higher retention and chemical degradation in the porous media, particularly under harsh reservoir conditions. Research has shown that nanoparticles (NPs) can act as an excellent stabilizing agent for CO2/water foams owing to their surface chemistry and high adsorption energy. The foams generated using NPs are more stable and provide better mobility control compared to surfactant-stabilized foams. One limitation of using NPs as foam stabilizers is their colloidal stability which limits the use of low-cost NPs. Combining surfactants and NPs for CO2 foam stabilization is a novel approach and has gained interest among researchers in recent years. Surfactants improve the dispersion of NPs in the aqueous phase and minimize particle aggregation. NPs on the other hand create a stable barrier at the CO2/water interface with the help of surfactants, thus generating highly stable and viscous foams. This paper presents a comprehensive review of the basic principles and applications of stabilized CO2 foams. A brief overview of CO2 foam flooding is discussed first, followed by a review of standalone surfactant-stabilized and NPs-stabilized CO2/water foams. The application of hybrid surfactant-NPs stabilized CO2 foams is then presented and areas requiring further investigation are highlighted. This review provides an insight into a novel approach to stabilize CO2/water foams and the effectiveness of the method as proved by various studies.
Key Findings
1
Hybrid surfactant–nanoparticle systems improve nanoparticle dispersion and reduce aggregation, while particles form a stable CO2/water interfacial barrier, producing highly stable and viscous foams.
2
Miscible CO2 flooding suffers from poor sweep efficiency because CO2 is substantially less viscous than reservoir crude oil.
3
Nanoparticle use is constrained by colloidal instability, particularly when employing low-cost particles, which can limit their effectiveness as foam stabilizers.
4
Nanoparticle-stabilized CO2 foams generally provide greater stability and better mobility control than surfactant-stabilized foams, owing to nanoparticle surface chemistry and high adsorption energy.
5
Surfactant-stabilized CO2 foams can improve mobility control, but their interfaces are relatively unstable and surfactants may experience retention and degradation in porous media.
Research Object
hybrid surfactant–nanoparticle-stabilized CO2/water foams for enhanced oil recovery
Research Subject
foam stability and mobility control during CO2 foam flooding, including surfactant–nanoparticle interfacial stabilization and enhanced oil recovery applications
Publication Details
Publication Date
2021-11-02
Journal
Publisher
ISSN
Cited by
42
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest