Ionization of sputtered material in high power impulse magnetron sputtering plasmas—comparison of titanium, chromium and aluminum

Ионизация распылённого материала в плазме импульсного магнетронного распыления высокой мощности — сравнение титана, хрома и алюминия
Achim von Keudell, Volker Schulz-von der Gathen, Julian Held
2023-05-25

Abel-inverted spectroscopic imagingelectron temperaturehigh power impulse magnetron sputteringsputter yieldsputtered species ionization
Abstract The ionization of sputtered species in high power impulse magnetron sputtering of titanium, chromium, and aluminum targets is analyzed using Abel-inverted spectroscopic imaging to locate the position of ionization. From the spatial emission of neutrals, it is deduced that most of the sputtered titanium particles become ionized within 0.5 mm distance from the target, whereas sputtered aluminum or chromium can travel much further through the discharge before ionization occurs. Probe measurements reveal the reason for this difference to be the unusually high electron temperature of around 4.5 eV for titanium compared to 2.6 eV and 1.5 eV for aluminum and chromium as the target material, respectively. These probe measurements are then compared to a global model derived from the ionization region model. Excellent agreement between model and measurements can be reached, but only if the transport physics for the confinement of the species is adjusted. Using the model, the difference between the three discharges can be traced back to be mostly caused by the sputter yield. Thus, we propose that ionization in discharges with low-yield materials should generally be expected to occur closer to the target surface, leading the ions to be affected more strongly by the electric field across the magnetic trap region, resulting in a more severe deposition rate loss compared to high-yield materials.
1
A global model agrees well with probe measurements only after adjusting the transport physics governing species confinement.
2
Abel-inverted spectroscopic imaging locates ionization of sputtered species in high-power impulse magnetron sputtering plasmas.
3
Electron temperatures differ strongly by target material: approximately 4.5 eV for titanium, 2.6 eV for aluminum, and 1.5 eV for chromium.
4
Most sputtered titanium is ionized within 0.5 mm of the target, whereas aluminum and chromium travel substantially farther before ionization.
5
The model attributes most discharge differences to sputter yield and predicts that low-yield materials ionize closer to the target, causing stronger electric-field effects and greater deposition-rate loss.

Sputtered titanium, chromium, and aluminum species in high power impulse magnetron sputtering plasmas

The spatial location and governing mechanisms of sputtered-species ionization, including the roles of electron temperature, sputter yield, and species transport confinement

Publication Details
Publication Date
2023-05-25
Journal
Publisher
ISSN
Cited by
17
Access Type
Author Information
Authors
Achim von Keudell
Volker Schulz-von der Gathen
Julian Held
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%