Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation

Высокостабильные и эффективные полностью неорганические бессвинцовые перовскитные солнечные элементы с пассивацией нативным оксидом
Yuanyuan Zhou, Xiao Cheng Zeng, Hector F. Garcés, Nitin P. Padture, Ming‐Gang Ju, Yi Zhang, Alexander D. Carl, Ronald L. Grimm, Luis K. Ono, Yabing Qi, Min Chen, Domenico Pacifici, Zafer M. Hawash, Tianyi Shen
2018-12-28

all-inorganic perovskitecesium tin-germanium triiodidelead-free perovskite solar cellsnative-oxide passivationphotovoltaic stability
Abstract There has been an urgent need to eliminate toxic lead from the prevailing halide perovskite solar cells (PSCs), but the current lead-free PSCs are still plagued with the critical issues of low efficiency and poor stability. This is primarily due to their inadequate photovoltaic properties and chemical stability. Herein we demonstrate the use of the lead-free, all-inorganic cesium tin-germanium triiodide (CsSn0.5Ge0.5I3) solid-solution perovskite as the light absorber in PSCs, delivering promising efficiency of up to 7.11%. More importantly, these PSCs show very high stability, with less than 10% decay in efficiency after 500 h of continuous operation in N2 atmosphere under one-sun illumination. The key to this striking performance of these PSCs is the formation of a full-coverage, stable native-oxide layer, which fully encapsulates and passivates the perovskite surfaces. The native-oxide passivation approach reported here represents an alternate avenue for boosting the efficiency and stability of lead-free PSCs.
1
A full-coverage native-oxide layer formed on the perovskite, encapsulating and passivating its surfaces.
2
All-inorganic, lead-free CsSn0.5Ge0.5I3 solid-solution perovskite was used as the light absorber in solar cells.
3
Devices retained over 90% of their initial efficiency after 500 hours of continuous one-sun operation in a nitrogen atmosphere.
4
Native-oxide passivation provides an alternative strategy for improving the efficiency and stability of lead-free perovskite solar cells.
5
The resulting lead-free perovskite solar cells achieved a power-conversion efficiency of up to 7.11%.

Lead-free all-inorganic cesium tin-germanium triiodide (CsSn0.5Ge0.5I3) solid-solution perovskite solar cells

Photovoltaic efficiency and operational stability enhanced by full-coverage native-oxide surface passivation

Publication Details
Publication Date
2018-12-28
Journal
Publisher
ISSN
Cited by
763
Access Type
Author Information
Authors
Yuanyuan Zhou
Xiao Cheng Zeng
Hector F. Garcés
Nitin P. Padture
Ming‐Gang Ju
Yi Zhang
Alexander D. Carl
Ronald L. Grimm
Luis K. Ono
Yabing Qi
Min Chen
Domenico Pacifici
Zafer M. Hawash
Tianyi Shen
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%