Perovskite solar cell’s efficiency, stability and scalability: A review
Эффективность, стабильность и масштабируемость перовскитных солнечных элементов: обзор
2023-01-01
SCID: 54.1/ex6w7jra
Discuss with AI
Perovskite solar cellsPhotovoltaic conversion efficiencyScalable fabricationStability testing protocolsTrap states
Figures from the paper
Abstract (AI)
In just a few years, the worldwide scientific community has worked diligently to increase the photovoltaic conversion efficiency of perovskite solar cells from 3.8% to 25.7%. Due to its low stability and poor scalability, it still lags in commercial performance concerning the crystalline silicon solar cell. Most of the high-efficiency perovskite solar cells (PSC) reported in the literature are on a 0.01 cm2 area, and the efficiency of PSC decreases with an increase in area. The maximum said stability to date is 10,000 h which is relatively low compared to crystalline silicon technology. This work discussed the causes of instability, degradation mechanism, scalable fabrication methods, and high-stability perovskite solar cell. It emphasised the need for setting up testing protocols for universal stability testing of perovskite solar cell technology. The study found that trap states in the absorber layer, hole transport layer (HTL), and electron transport layer (ETL) are the reason for lower stability. The lower dimension perovskite solar cell shows better stability compared to its 3D counterparts.
Key Findings
1
Lower-dimensional perovskite solar cells exhibit better stability than their three-dimensional counterparts, while universal stability-testing protocols are needed.
2
Perovskite solar-cell efficiency decreases as device area increases; most reported high efficiencies use an extremely small 0.01 cm² area.
3
Perovskite solar-cell efficiency increased rapidly from 3.8% to 25.7%, but commercial performance remains behind crystalline silicon.
4
The maximum reported stability is 10,000 hours, which remains relatively low compared with crystalline-silicon technology.
5
Trap states in the absorber, hole-transport, and electron-transport layers are identified as major causes of reduced device stability.
Research Object
Perovskite solar cells
Research Subject
Photovoltaic conversion efficiency, operational stability, scalability, degradation mechanisms, and universal stability-testing requirements
Publication Details
Publication Date
2023-01-01
Journal
Publisher
ISSN
Cited by
139
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai8
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells2009
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites2012
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%2012
6.5% efficient perovskite quantum-dot-sensitized solar cell2011
Organometal halide perovskite solar cells: degradation and stability2015
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation2014
Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation2018
The Dawn of Lead‐Free Perovskite Solar Cell: Highly Stable Double Perovskite Cs 2 AgBiBr 6 Film2017