Minimizing dilution in open stope mining with a focus on stope design and narrow vein longhole blasting
Минимизация разведения при подземной открытой отработке табличных руд с акцентом на проектирование камер и длинноотвальные буровзрывные работы в узких жилках
2009-01-01
SCID: 54.1/g9w7kwwa
Discuss with AI
Cavity Monitoring System (CMS)equivalent linear overbreak (ELOS)narrow vein longhole blastingopen stope miningunplanned dilution
Figures from the paper
Abstract (AI)
This thesis presents the results of three years of research which focused on minimizing dilution in open stope mining. The research encompassed both stope design and narrow vein longhole blasting. A new empirical design approach has been developed for estimating unplanned dilution from open stope hangingwalls and footwalls. The resulting design charts are based on quantifiable measurements of overbreak/slough made with the Cavity Monitoring System (CMS), and were developed from a comprehensive database o f stoping histories compiled from six (6) Canadian underground open stoping operations. A new parameter termed ELOS (equivalent linear overbreak/slough) has been introduced and incorporated into the design charts as a measure of unplanned dilution. Theoretical justification for the design methodology has been demonstrated through a numerical modelling study examining the zone of relaxation around open stopes. Statistical methods, neural networks, and additional case histories have been used to validate the proposed design zones. This new approach to stope design is an improvement over existing methods in that it allows stope sizes to be determined based on an "acceptable" level of dilution rather than qualitative descriptions of stability such as: "stable"; "transition zone"; or "potentially unstable". In narrow vein open stope mining, even i f stopes are sized to be inherently stable (i.e. good stope design), blast induced overbreak can result in high levels of unplanned dilution. This study assessed the performance of three narrow vein blast patterns: the 3:2 pattern; the 2:1 (dice-five) pattern; and the 1:1 (stagger) pattern. The study was carried out at the Lupin Mine (NWT). The patterns were evaluated on the basis of: cost; blast damage potential; charge interaction; fragmentation; and tolerance to lapses in quality of drilling and loading practice. Guidelines have been developed regarding the choice and implementation o f narrow vein patterns.
Key Findings
1
A new empirical stope design approach was developed to estimate unplanned dilution from hangingwalls and footwalls using quantifiable overbreak/slough measurements.
2
A new parameter, ELOS (equivalent linear overbreak/slough), was introduced and incorporated into design charts as a measure of unplanned dilution.
3
Design charts based on Cavity Monitoring System (CMS) data and a database from six Canadian open stoping operations were produced to predict unplanned dilution.
4
Evaluation at Lupin Mine of three narrow vein blast patterns (3:2, 2:1 dice-five, 1:1 stagger) produced guidelines balancing cost, blast damage potential, fragmentation, charge interaction, and tolerance to drilling/loading lapses.
5
Numerical modelling, statistical methods, neural networks, and additional case histories validate the theoretical justification and proposed stope design zones.
Research Object
Open stope mining operations (including stope hangingwalls and footwalls and narrow vein longhole stopes)
Research Subject
Minimization and estimation of unplanned dilution via stope design and narrow vein longhole blasting, including empirical design charts using ELOS, overbreak/slough measurement, numerical modelling of relaxation zones, and evaluation of narrow vein blast patterns
Publication Details
Publication Date
2009-01-01
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest