3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

3D-печать непрерывных углеродноволоконных композитов сверхвысокой прочности
Dong Liang Lin, Pedram Parandoush, Chi Zhou
2018-11-06

continuous carbon fiber compositesfused deposition modelinginterlaminar bonding strengthlaminated object manufacturingprepreg composite sheets
3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries.
1
A novel LOM-inspired process 3D-prints continuous CFRTPs from prepreg sheets using geometry-specific cutting, CO2-laser bonding, and roller consolidation.
2
Computed tomography shows low void content, while lap-shear tests demonstrate interlaminar bonding strength comparable to conventional autoclave manufacturing.
3
Fiber alignment can be controlled, enabling unidirectional [0°]s, cross-ply [0/90°]s, and [0/−45/0/45°]s reinforcement architectures with evaluated mechanical properties.
4
The method addresses weak interlayer bonding, bead or layer voids, and low fiber volume limitations associated with conventional FDM and extrusion approaches.
5
The process achieves reported record tensile strength of 668.3 MPa and flexural strength of 591.16 MPa among 3D-printed CFRTPs.

3D-printed continuous carbon fiber reinforced thermoplastic (CFRTP) composites produced from prepreg composite sheets

The effects of low void content, interlayer/interfacial bonding strength, continuous carbon-fiber volume ratio and alignment on the mechanical performance of 3D-printed CFRTPs

Publication Details
Publication Date
2018-11-06
Journal
Publisher
ISSN
Cited by
128
Access Type
Author Information
Authors
Dong Liang Lin
Pedram Parandoush
Chi Zhou
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%