Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Трёхмерная печать композитов с непрерывными волокнами методом пропитки в сопле
2016-03-11
SCID: 54.1/retyh8e5
Discuss with AI
carbon fiber reinforcementcontinuous-fiber compositesfused-deposition modelingin-nozzle impregnationpolylactic acid
Figures from the paper
Abstract (AI)
We have developed a method for the three-dimensional (3D) printing of continuous fiber-reinforced thermoplastics based on fused-deposition modeling. The technique enables direct 3D fabrication without the use of molds and may become the standard next-generation composite fabrication methodology. A thermoplastic filament and continuous fibers were separately supplied to the 3D printer and the fibers were impregnated with the filament within the heated nozzle of the printer immediately before printing. Polylactic acid was used as the matrix while carbon fibers, or twisted yarns of natural jute fibers, were used as the reinforcements. The thermoplastics reinforced with unidirectional jute fibers were examples of plant-sourced composites; those reinforced with unidirectional carbon fiber showed mechanical properties superior to those of both the jute-reinforced and unreinforced thermoplastics. Continuous fiber reinforcement improved the tensile strength of the printed composites relative to the values shown by conventional 3D-printed polymer-based composites.
Key Findings
1
A fused-deposition method was developed for direct 3D printing of continuous-fiber-reinforced thermoplastics without molds.
2
Continuous fiber reinforcement increased tensile strength compared with conventional polymer-based 3D-printed composites.
3
The method printed polylactic acid composites reinforced with either carbon fibers or twisted natural jute-fiber yarns.
4
Thermoplastic filament and continuous fibers are separately fed and impregnated inside the heated nozzle immediately before deposition.
5
Unidirectional carbon-fiber reinforcement produced higher mechanical properties than both unidirectional jute-reinforced and unreinforced thermoplastics.
Research Object
3D-printed continuous-fiber-reinforced thermoplastics, specifically polylactic acid composites reinforced with continuous carbon fibers or twisted natural jute-fiber yarns
Research Subject
The effect of continuous carbon- and jute-fiber reinforcement and in-nozzle impregnation on the mechanical properties, particularly tensile strength, of 3D-printed composites
Publication Details
Publication Date
2016-03-11
Journal
Publisher
ISSN
Cited by
1288
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai1
Cited by8
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments2020
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications2021
Laminated Object Manufacturing of Ceramic‐Based Materials2020
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review2024
3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites2018
3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective2022
Mechanical Joining of Fibre Reinforced Polymer Composites to Metals—A Review. Part II: Riveting, Clinching, Non-Adhesive Form-Locked Joints, Pin and Loop Joining2020
Low‐pressure additive manufacturing of continuous fiber‐reinforced polymer composites2019