Non‐Volatile Optical Switch Element Enabled by Low‐Loss Phase Change Material
Элемент энергонезависимого оптического переключателя на основе фазопереходного материала с низкими потерями
2023-06-17
SCID: 54.1/7azadxp6
Discuss with AI
Mach-Zehnder interferometerSb2Se3 phase shiftermultilevel switchingnon-volatile optical switchphase-change material
Figures from the paper
Abstract (AI)
Abstract Mach–Zehnder interferometers (MZIs) integrated with phase‐change materials have attracted great interest due to their low power consumption and ultra‐compact size, which are favored for reconfigurable photonic processors. However, they suffer from a low optical extinction ratio and limited switching cycles due to high material loss and poor reversible repeatability caused by material degradation. Here a non‐volatile electrically reconfigurable 2 × 2 MZI integrated with a low‐loss phase‐change material Sb2Se3 encapsulated in Al2O3 layers is demonstrated. The phase change is electrically actuated by a forward‐biased silicon p‐i‐n diode. The switch extinction ratio is more than 20 dB due to the low‐loss Sb2Se3‐based phase shifter. By dividing the Sb2Se3 patch into small sub‐cells to restrict the material reflow, more than 10 000 reversible phase‐change cycles and 6‐bit multilevel switching states are achieved by programming the electrical pulses. Its non‐volatility, high endurance, and fine‐tuning capability makes the device promising in large‐scale low‐power reconfigurable photonic processors.
Key Findings
1
A forward-biased silicon p-i-n diode electrically actuates the Sb2Se3 phase transition.
2
A non-volatile electrically reconfigurable 2 × 2 Mach–Zehnder interferometer switch was demonstrated using low-loss Sb2Se3 encapsulated in Al2O3.
3
Dividing the Sb2Se3 patch into small sub-cells restricts material reflow, enabling more than 10,000 reversible switching cycles.
4
Electrical pulse programming provides six-bit multilevel switching states, combining non-volatility, endurance, and fine tuning for reconfigurable photonic processors.
5
The switch achieves an extinction ratio exceeding 20 dB because of the low optical loss of the Sb2Se3 phase shifter.
Research Object
a non-volatile electrically reconfigurable 2 × 2 Mach–Zehnder interferometer integrated with an Al2O3-encapsulated Sb2Se3 phase-change material
Research Subject
the optical switching performance, endurance, multilevel programmability, and reversible phase-change behavior of the Sb2Se3-based phase shifter
Publication Details
Publication Date
2023-06-17
Journal
Publisher
ISSN
Cited by
98
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai11
A New Family of Ultralow Loss Reversible Phase‐Change Materials for Photonic Integrated Circuits: Sb 2 S 3 and Sb 2 Se 32020
On-chip photonic synapse2017
Multipurpose silicon photonics signal processor core2017
Programmable phase-change metasurfaces on waveguides for multimode photonic convolutional neural network2021
Low-Loss and Broadband Nonvolatile Phase-Change Directional Coupler Switches2019
Nonvolatile programmable silicon photonics using an ultralow-loss Sb 2 Se 3 phase change material2021
Miniature Multilevel Optical Memristive Switch Using Phase Change Material2019
Low-Loss Integrated Photonic Switch Using Subwavelength Patterned Phase Change Material2018
Nonvolatile Multilevel Switching of Silicon Photonic Devices with In 2 O 3 /GST Segmented Structures2023
Resonant multilevel optical switching with phase change material GST2022
Phase change material enabled 2 × 2 silicon nonvolatile optical switch2021
Cited by5
Roadmapping the next generation of silicon photonics2024
Monolithic back-end-of-line integration of phase change materials into foundry-manufactured silicon photonics2024
The changing face of phase change photonics2026
Non-volatile optical switch based on Sb 2 Se 3 -loaded three-mode interference2025
A Review of Integrated Photonic Devices Using Sb 2 Se 32024