Origin of the energetic ions at the substrate generated during high power pulsed magnetron sputtering of titanium

Происхождение энергетических ионов на подложке, образующихся при импульсном магнетронном распылении титана при высокой мощности
Jan Benedikt, Achim von Keudell, C Maszl, W Breilmann, J Benedikt, A von Keudell, Christian Maszl
2014-05-14

double layerenergetic metal ionshigh power impulse magnetron sputteringspokes regimetime-resolved mass spectrometry
HiPIMS plasmas generate energetic metal ions at the substrate as a major difference to conventional direct current magnetron sputtering. The origin of these ions is still an open issue, which is unraveled by using two fast diagnostics: time resolved mass spectrometry with a temporal resolution of 2 $μ$s and phase resolved optical emission spectroscopy with a temporal resolution of 1 $μ$s. A power scan from dcMS-like to HiPIMS plasmas was performed, with a 2-inch magnetron and a titanium target as sputter source and argon as working gas. Clear differences in the transport as well in the energetic properties of Ar$^{+}$, Ar$^{2+}$, Ti$^+$ and Ti$^{2+}$ were observed. For discharges with highest peak power densities a high energetic group of Ti$^+$ and Ti$^{2+}$ could be identified. A cold group of ions is always present. It is found that hot ions are observed only, when the plasma enters the spokes regime, which can be monitored by oscillations in the IV-characteristics in the MHz range that are picked up by the used VI-probes. These oscillations are correlated with the spokes phenomenon and are explained as an amplification of the Hall current inside the spokes as hot ionization zones. To explain the presence of energetic ions, we propose a double layer (DL) confining the hot plasma inside a spoke: if an atom becomes ionized inside the spokes region it is accelerated because of the DL to higher energies whereas its energy remains unchanged if it is ionized outside. In applying this DL model to our measurements the observed phenomena as well as several measurements from other groups can be explained. Only if spokes and a double layer are present the confined particles can gain enough energy to leave the magnetic trap. We conclude from our findings that the spoke phenomenon represents the essence of HiPIMS plasmas, explaining their good performance for material synthesis applications.
1
At the highest peak power densities, energetic Ti+ and Ti2+ populations appear alongside a cold ion population that is always present.
2
Fast time-resolved mass spectrometry and optical emission spectroscopy distinguish the transport and energies of Ar+, Ar2+, Ti+, and Ti2+ during titanium HiPIMS.
3
Hot ions emerge only when the discharge enters the spoke regime, identifiable through MHz oscillations in voltage-current characteristics.
4
Spokes and their associated double layer enable confined particles to gain sufficient energy to escape the magnetic trap, making spokes central to HiPIMS material-synthesis performance.
5
The authors attribute energetic-ion formation to a double layer confining hot plasma within spokes, accelerating ions created inside the spokes while leaving externally formed ions largely unenergized.

Energetic Ar$^{+}$, Ar$^{2+}$, Ti$^+$, and Ti$^{2+}$ ions generated at the substrate in HiPIMS plasmas using a titanium target and argon working gas

The origin, transport, and energy gain of substrate-reaching ions, particularly the formation of hot titanium ions through spoke-associated double-layer acceleration

Publication Details
Publication Date
2014-05-14
Journal
Publisher
ISSN
Cited by
103
Access Type
Author Information
Authors
Jan Benedikt
Achim von Keudell
C Maszl
W Breilmann
J Benedikt
A von Keudell
Christian Maszl
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%