Dynamic of the growth flux at the substrate during high-power pulsed magnetron sputtering (HiPIMS) of titanium

Динамика потока роста на подложке при импульсном магнетронном распылении титана мощными импульсами (HiPIMS)
Jan Benedikt, Achim von Keudell, Wolfgang Breilmann, Christian Maszl
2013-11-07

Energy-resolved ion mass spectrometryHigh-power impulse magnetron sputteringShifted Maxwellian distributionsTime-resolved ion fluxTitanium sputtering
The temporal distribution of the incident fluxes of argon and titanium ions on the substrate during an argon HiPIMS pulse to sputter titanium with pulse lengths between 50 to 400 µ s and peak powers up to 6 kW are measured by energy-resolved ion mass spectrometry with a temporal resolution of 2 µ s. The data are correlated with time-resolved growth rates and with phase-resolved optical emission spectra. Four ion contributions impinging on the substrate at different times and energies are identified: (i) an initial argon ion burst after ignition, (ii) a titanium and argon ion flux in phase with the plasma current due to ionized neutrals in front of the target, (iii) a small energetic burst of ions after plasma shut off, and (iv) cold ions impinging on the substrate in the late afterglow showing a pronounced maximum in current. The last contribution originates from ions generated during the plasma current maximum at 50 µ s after ignition in the magnetic trap in front of the target. They require long transport times of a few 100 µ s to reach the substrate. All energy distributions can be very well fitted with a shifted Maxwellian indicating an efficient thermalization of the energetic species on their travel from target to substrate. The energy of titanium is higher than that of argon, because they originate from energetic neutrals of the sputter process. The determination of the temporal sequence of species, energies and fluxes in HiPIMS may lead to design rules for the targeted generation of these discharges and for synchronized biasing concepts to further improve the capabilities of high-power impulse magnetron sputtering (HiPIMS) processes.
1
All measured ion-energy distributions are well described by shifted Maxwellians, indicating efficient thermalization during transport.
2
Late-afterglow ions originate near the target during the plasma-current maximum and require several hundred microseconds to reach the substrate.
3
The contributions comprise an initial argon-ion burst, current-synchronized titanium and argon fluxes, a post-shutdown energetic burst, and cold late-afterglow ions.
4
Time-resolved mass spectrometry identifies four distinct ion contributions reaching the substrate during titanium HiPIMS pulses.
5
Titanium ions are more energetic than argon ions because they originate from energetic sputtered neutrals; the timing data support synchronized biasing strategies.

incident argon and titanium ion fluxes reaching the substrate during titanium HiPIMS

temporal sequence, energy distributions, and transport-related contributions of the ion flux during and after the HiPIMS pulse, correlated with time-resolved growth

Publication Details
Publication Date
2013-11-07
Journal
Publisher
ISSN
Cited by
38
Access Type
Author Information
Authors
Jan Benedikt
Achim von Keudell
Wolfgang Breilmann
Christian Maszl
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%