3D printing of ceramics: A review
3D-печать керамики: обзор
2018-11-06
SCID: 54.1/mnb8m3za
Discuss with AI
additive manufacturingceramic 3D printingenergy source–material interactionsfeedstock propertiespost-treatments
Figures from the paper
Abstract (AI)
Along with extensive research on the three-dimensional (3D) printing of polymers and metals, 3D printing of ceramics is now the latest trend to come under the spotlight. The ability to fabricate ceramic components of arbitrarily complex shapes has been extremely challenging without 3D printing. This review focuses on the latest advances in the 3D printing of ceramics and presents the historical origins and evolution of each related technique. The main technical aspects, including feedstock properties, process control, post-treatments and energy source–material interactions, are also discussed. The technical challenges and advice about how to address these are presented. Comparisons are made between the techniques to facilitate the selection of the best ones in practical use. In addition, representative applications of the 3D printing of various types of ceramics are surveyed. Future directions are pointed out on the advancement on materials and forming mechanism for the fabrication of high-performance ceramic components.
Key Findings
1
3D printing enables fabrication of ceramic components with arbitrarily complex geometries that are extremely difficult to produce using conventional methods.
2
Future progress depends on advances in ceramic materials and forming mechanisms for producing high-performance components.
3
Key process factors include feedstock properties, process control, post-treatment procedures, and energy source–material interactions.
4
The review identifies technical challenges, offers strategies for addressing them, and compares techniques to support practical process selection.
5
The review traces the historical development and evolution of major ceramic 3D-printing techniques.
Research Object
3D printing of ceramic components
Research Subject
Recent advances, techniques, technical aspects, challenges, comparative performance, applications, and future directions in ceramic 3D printing
Publication Details
Publication Date
2018-11-06
Journal
Publisher
ISSN
Cited by
2120
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai4
Cited by15
Additive manufacturing of structural materials2021
3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)2021
Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review2023
Direct ink writing advances in multi-material structures for a sustainable future2020
Photopolymerization-based additive manufacturing of ceramics: A systematic review2021
Additive manufacturing of ceramics: Advances, challenges, and outlook2023
Laminated Object Manufacturing of Ceramic‐Based Materials2020
Additive manufacturing of zirconia ceramics: a state-of-the-art review2020
Mechanical Properties and Bond Strength of Additively Manufactured and Milled Dental Zirconia: A Pilot Study2021
Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin2020
Fabrication of a ceramic/metal (Al 2 O 3 /Al) composite by 3D printing as an advanced refractory with enhanced electrical conductivity2020
Additive Manufacturing of Ceramic Materials via Direct Ink Writing (DIW): A Review2026
Biocompatible 3D printed yttria-stabilized zirconia parts using direct ink writing2023
Additive Zirconia in Dentistry: Techniques, Trends, and Future Perspectives2025
3-D Printed Monolithic Dielectric Waveguide Filter Using LCM Technique2022