Impact of current transformer saturation on overcurrent protection operation
Влияние насыщения трансформаторов тока на работу максимальной токовой защиты
2003-06-25
SCID: 54.1/uy8fhkuq
Discuss with AI
CT burdencurrent transformer saturationfault conditionsovercurrent protectionprotection device coordination
Figures from the paper
Abstract (AI)
If current transformer (CT) characteristics are not properly selected for fault conditions, saturation will occur which can affect protection device operation. In some applications even if CTs are properly sized, it is necessary to locate protection devices far from the CTs. In these cases, the wire resistance, which adds to the CT burden, causes CT saturation at smaller currents than when located close to the protection devices. The impact of CT saturation on protection device operation is different for different protection device types and protection schemes. This paper investigates the influence of CT saturation on overcurrent protection when protection devices are located far from the CTs, causing their saturation during faults. A study was performed to verify that delayed overcurrent protection response will not cause mis-coordination with other protection devices. It is shown that CT saturation will not significantly delay overcurrent protection operation for most common settings.
Key Findings
1
A study found that delayed overcurrent protection response from CT saturation generally does not cause mis-coordination with other protection devices.
2
For most common settings, CT saturation does not significantly delay overcurrent protection operation.
3
Inadequately selected CT characteristics can cause saturation during faults and affect overcurrent protection operation.
4
Long distances between current transformers and protection devices increase wire resistance and CT burden, causing saturation at lower fault currents.
5
The impact of CT saturation depends on the protection-device type and protection scheme.
Research Object
Overcurrent protection systems with current transformers located far from protection devices during faults
Research Subject
The influence of current-transformer saturation, caused by CT burden and remote wiring resistance, on overcurrent protection response delay and coordination
Publication Details
Publication Date
2003-06-25
Journal
Publisher
ISSN
Cited by
32
Access Type
Author Information
Download PDF
Subscribe to digest
Cited by4
Compensation of the Current-Transformer Saturation Effects for Digital Relays2011
Fast compensation of current transformer saturation2010
High Accuracy and Saturation Free Current Transformers for Medium Voltage Networks of Nuclear Power Plants2018
Saturation of Current Transformers and its Impact on Digital Overcurrent Relays2006