A bulk plasma model for dc and HiPIMS magnetrons
Модель объёмной плазмы для магнетронов постоянного тока и HiPIMS
2008-08-26
SCID: 54.1/w3xjyaw8
Discuss with AI
HiPIMS magnetronsbulk plasma modeldc magnetron sputteringelectric field reversaltransverse resistivity
Figures from the paper
Abstract (AI)
A plasma discharge model has been developed for the bulk plasma (also called the extended presheath) in sputtering magnetrons. It can be used both for high power impulse magnetron sputtering (HiPIMS) and conventional dc sputtering magnetrons. Demonstration calculations are made for the parameters of the HiPIMS sputtering magnetron at Link "oping University, and also benchmarked against results in the literature on dc magnetrons. New insight is obtained regarding the structure and time development of the currents, the electric fields and the potential profiles. The transverse resistivity eta(perpendicular to) has been identified as having fundamental importance both for the potential profiles and for the motion of ionized target material through the bulk plasma. New findings are that in the HiPIMS mode, as a consequence of a high value of eta(perpendicular to), (1) there can be an electric field reversal that in our case extends 0.01-0.04m from the target, (2) the electric field in the bulk plasma is typically an order of magnitude weaker than in dc magnetrons, (3) in the region of electric field reversal the azimuthal current is diamagnetic in nature, i.e. mainly driven by the electron pressure gradient, and actually somewhat reduced by the electron Hall current which here has a reversed direction and (4) the azimuthal current above the racetrack can, through resistive friction, significantly influence the motion of the ionized fraction of the sputtered material and deflect it sideways, away from the target and towards the walls of the magnetron.
Key Findings
1
A bulk plasma model was developed for both conventional dc and high-power impulse magnetron sputtering (HiPIMS) discharges.
2
Bulk-plasma electric fields in HiPIMS are typically an order of magnitude weaker than those in dc magnetrons.
3
In HiPIMS, high transverse resistivity can produce electric-field reversal extending 0.01–0.04 m from the target.
4
Resistive friction from the azimuthal current above the racetrack can deflect ionized sputtered material sideways, away from the target and toward magnetron walls.
5
The model identifies transverse resistivity as fundamental to potential profiles and transport of ionized target material through the bulk plasma.
6
Within the electric-field-reversal region, the azimuthal current is mainly diamagnetic, driven by the electron pressure gradient, while the reversed electron Hall current reduces it.
Research Object
The bulk plasma (extended presheath) in conventional dc and high-power impulse magnetron sputtering (HiPIMS) discharges
Research Subject
The structure and temporal development of currents, electric fields, potential profiles, and transverse-resistivity-driven transport of ionized sputtered target material
Publication Details
Publication Date
2008-08-26
Journal
Publisher
ISSN
Cited by
56
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
Cited by6
The evolution of the plasma potential in a HiPIMS discharge and its relationship to deposition rate2010
Short- and long-term plasma phenomena in a HiPIMS discharge2010
Understanding deposition rate loss in high power impulse magnetron sputtering: I. Ionization-driven electric fields2012
Anomalous cross- B field transport and spokes in HiPIMS plasma2016
Internal current measurements in high power impulse magnetron sputtering2011
Electron dynamics in crossed-field discharges2023