On the HiPIMS benefits of multi-pulse operating mode
О преимуществах многoимпульсного режима работы HiPIMS
2014-12-03
SCID: 54.1/52gvdynf
Discuss with AI
high power impulse magnetron sputteringmulti-pulse HiPIMSthin film crystallographic orientationtunable diode laser absorption spectroscopytungsten deposition rate
Figures from the paper
Abstract (AI)
High power impulse magnetron sputtering (HiPIMS) technology is particularly interesting for its high ionization efficiency of the sputtered target elements. However, one of its major drawbacks is the typically lower deposition rate, compared to direct current magnetron sputtering (DCMS), mainly due to the metal ion back-attraction. Using HiPIMS with very short pulses (less than 5 µs), it is possible to partially overcome the deposition rate limitation. In this contribution our focus is the optimization of the HiPIMS process with respect to DCMS, based on the physical understanding of the plasma state when using sequences of pulses, instead of general single high power pulse. Sequences of consecutive very short high-power pulses significantly increase the deposition rate compared to standard HiPIMS (s-HiPIMS), as proven by quartz crystal microbalance measurements and by scanning electron microscopy cross section images of the deposited films. Tailoring the sequences of multi-pulses (m-HiPIMS), experimental results undoubtedly show that tungsten deposition rate is at least 50% higher than in the s-HiPIMS, for the same average power. This finding is explained via tuneable diode laser absorption spectroscopy measurements of the sputtered W atoms correlated with electrostatic probe ion detection and time evolution of the plasma potential measured at the substrate position. Moreover, poly-crystalline thin film structure changes to a mainly preferential orientation (2 0 0) and film roughness is drastically reduced as provided by x-ray diffraction and atomic force microscopy, respectively.
Key Findings
1
At equal average power, multi-pulse HiPIMS achieves a tungsten deposition rate at least 50% higher than standard HiPIMS.
2
Consecutive high-power pulse sequences substantially increase deposition rates compared with standard single-pulse HiPIMS, as shown by quartz crystal microbalance and microscopy measurements.
3
Laser absorption spectroscopy, ion detection, and plasma-potential measurements link the deposition-rate improvement to changes in sputtered-atom and plasma dynamics.
4
Multi-pulse HiPIMS changes the film structure toward preferential (200) orientation and drastically reduces surface roughness.
5
Very short HiPIMS pulses below 5 µs can partially overcome the deposition-rate limitation associated with metal-ion back-attraction.
Research Object
tungsten HiPIMS deposition using single and multi-pulse operating modes
Research Subject
the effects of multi-pulse operation on deposition rate, plasma dynamics, crystallographic texture, and surface roughness compared with standard HiPIMS
Publication Details
Publication Date
2014-12-03
Journal
Publisher
ISSN
Cited by
77
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai4
The evolution of the plasma potential in a HiPIMS discharge and its relationship to deposition rate2010
Short- and long-term plasma phenomena in a HiPIMS discharge2010
Understanding deposition rate loss in high power impulse magnetron sputtering: I. Ionization-driven electric fields2012
Dynamic of the growth flux at the substrate during high-power pulsed magnetron sputtering (HiPIMS) of titanium2013
Cited by5
Industrial application potential of high power impulse magnetron sputtering for wear and corrosion protection coatings2023
Microsecond ion flux mapping in HiPIMS via magnetized QCM probe2025
Understanding ion and atom fluxes during high-power impulse magnetron sputtering deposition of NbCx films from a compound target2023
Détermination des fonctions de distribution des flux des espèces neutres et ionisées en procédé HiPIMS et corrélations avec les couches minces de type TiN déposées2019
Mise au point de la fluorescence induite par diode laser résolue en temps : application à l'étude du transport des atomes de tungstène pulvérisés en procédé magnétron continu ou pulsé haute puissance2015